best snell for harness hooks?

[870 ExpressMag]

maybe i just need to be more careful when storing them, because when i did tie them up like that they stood up well to heavy hard fighting fish, only time i lot part of one was from a cat that had swallowed the whole mess and we only got part of it back.

[walleye2go]

Same here, I use the easy snell method. I would say it's the type of line you're using, or like Aaron said, you may need to cinch tighter. 14lb is pretty light. I prefer at least 20lb.

Greg

[870 ExpressMag]

i was always under the impression that a lighter line could be tied tighter than a heavier line, that was not my purpose for using 12 and 14lb, i used what i had

[PDnaz]

I use this method and have not had a problem. 20# Ande is what I am using.
After tying I insert the hook through the hole where the chain goes on my
finger nail clippers and pull tight. Be sure to wrap at least 8 times. I just tried
to push the line back through the eye to unwrap and it looks good.

[BossHogg]

I use this method and have not had a problem. 20# Ande is what I am using.
After tying I insert the hook through the hole where the chain goes on my
finger nail clippers and pull tight. Be sure to wrap at least 8 times. I just tried
to push the line back through the eye to unwrap and it looks good.

I always wrap 9 times. on the octopus hooks and 11 or 12 wraps on a treble.

[rscotfish]

water base fly head cement 1 fluid ounce bottle around 4 dollars at netcraft I put it on my hooks after I tie them and then on my loop knot then I hang them and go to the next harness dry in 5 minutes. I also use this product on my jig heads the thread. I havnt lost one since I started using this its clear and you can not see it on the rig works very well .a also use 20 pound mono and wrap 10 times then thru the hook eye and back around the loop and pull tightly set your hook in your table and pull tightly

[870 ExpressMag]

water base fly head cement 1 fluid ounce bottle around 4 dollars at netcraft I put it on my hooks after I tie them and then on my loop knot then I hang them and go to the next harness dry in 5 minutes. I also use this product on my jig heads the thread. I havnt lost one since I started using this its clear and you can not see it on the rig works very well .a also use 20 pound mono and wrap 10 times then thru the hook eye and back around the loop and pull tightly set your hook in your table and pull tightly

i dont know why i never thought of the head cement, thats a good idea, since my problem is not with the strength of the knot, but with the slight loosening when pushing the hook into the rubber storage cylinder.

i still dont see how using the easy snell method pulling any tighter is gonna make it so it cant be pushed back through the eyelet and loosen, i use a gomakatsu walleye wide gap hook with the up turned eye, i put end of line from top to bottom through the eye, or essentially back to front and lay the tag end down along back of hook shank, take the standing line and make my wraps from the eye down toward the hook loop, after the wraps are done then i take the standing line and go back up through the hook eye, basically from back to front and then that leaves my running line going up straight through the eyelet for a straight pull on the hook, but it is just continued from the last wrap of the snell then up through the eyelet, so the tighter you pull it, makes the wraps tighter, but when pushed backwards, starts loosening the wraps at the bottom of the snell first, i guess i dont understand how it can get locked down so tight as not to looosen when pushed backwards with this method, unless i am missing something or missing a step, thanks for the help guys i appreciate it

[rscotfish]

maybe i just need to be more careful when storing them, because when i did tie them up like that they stood up well to heavy hard fighting fish, only time i lot part of one was from a cat that had swallowed the whole mess and we only got part of it back.

I was tying in the winter my cat seen the blade and next thing I know 50 bucks to the vet to remove the hook from her belly I had it in my hand she ripped it out and flew up the stairs when I got to her she had it in her lower belly and the barb was stuck try to pull a hook from a cat when shes awake

[BossHogg]

I was tying in the winter my cat seen the blade and next thing I know 50 bucks to the vet to remove the hook from her belly I had it in my hand she ripped it out and flew up the stairs when I got to her she had it in her lower belly and the barb was stuck try to pull a hook from a cat when shes awake

870 I thought you were talking about a catfish

[870 ExpressMag]

870 I thought you were talking about a catfish

i was! i cant imagine pulling a hook out of an awake cat, i watch my wife give ours a bath, thats hard enough!