Please elaborate.......... Please elaborate.......... Please elaborate.......... Please elaborate..........
Thanks Thanks:  0
Likes Likes:  0
Results 1 to 10 of 19

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Feb 2012
    Location
    Lima/Marblehead
    Posts
    124
    Post Thanks / Like

    Default

    I run big boards and mainly only use weights for reefrunners. Will use on harnesses some. Trutrip 40 and dipsys are my main diving devices. Fast and easy to run when running 14+ rods at a time.

  2. #2
    Join Date
    Jul 2009
    Location
    Fostoria, Ohio
    Posts
    1,805
    Post Thanks / Like

    Default

    Harnesses by themselves have no diving qualities so with the Wt. 20ft ahead of the harness you should be able to tell how deep the wt is but the harness will be forced up by the water pushing it upward. If you change to inline Wt. system you will have a better knowledge as to where your harness is because it will be only the length of your leader away from your weight. The snap wt system works best with crank baits because most cranks have some diving ability keeping it in the targeted zone. But that diving ability has to be considered also when using the snap Wt. system as it will add depth to the known depth of the snap Wt. you are using.
    Last edited by wakina; 03-23-2014 at 10:55 PM.
    Wakina
    23 foot Pro Line
    HDS 5X Sonar
    HDS 5M GPS
    Navonics chip, model #DMSD/649P+
    Platinum Plus Lake Erie and Lake St Clair Marine.
    Raymarine Dragonfly7 Sonar-Downvision-GPS combo with chirp technology.
    Navonics Hotmaps Premium East chip

  3. #3
    Join Date
    Feb 2013
    Posts
    61
    Post Thanks / Like

    Default dipsey size

    I use size one (1) dipsey with ring and set at #3 & #1.5 when using 2 on a side; Set at#3, #2, #1 when using 3 on a side. With 2 people I use #3 setting and straight line 40' jet on a side. With 3 people #3 & #1.5 settings and straight line 40' jet on a side. More trash fish than tangles. Make a long arc when turning. Catch several 'eyes on the inside when turning since the dipseys fall/slow down and make a different presentation. I don't troll over/near reefs.

  4. #4
    Join Date
    Apr 2009
    Posts
    90
    Post Thanks / Like

    Default Dipsey speed

    What's the minimum speed that dipseys work well? I tried them for a while last year and I think I was going too slow. They didn't want to side plane very well. Thanks.

  5. #5
    Join Date
    Feb 2013
    Posts
    61
    Post Thanks / Like

    Default dipsey speed

    I try to run 1.7 to 1.9 knots.

  6. #6
    Join Date
    Jul 2010
    Posts
    161
    Post Thanks / Like

    Default

    Jeff,

    When you make your big boards and I know you will give me a call and I will drive up and we can make two sets..

    Aaron

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •