Quote Originally Posted by Steuben1 View Post
Ok, here goes. I am running 6 Church TX-22's with tattle flags. The rods are Accudepth, 8'6" medium with 10LB PLine Mono. Reels are Daiwa Accudepth 27's. On friday, we ran crawler harnesses on 2oz inline weights. We ran the harnesses 30' - 35' back at 1.5 and caught some nice fish.

I understand pulling harnesses, that's pretty straight forward. One part I am wondering about it pulling crank baits? Do you just run cranks without inline weights? What about those Tadpoles I am seeing from Off Shore tackle? Are any of you running those?
This summer was me and my uncle's first time trolling we were in his crestliner. We used 4 church walleye boards. I thought we had a lot of success for first timers much of the credit goes to a few people on this board helping us and YouTube. Your set up sounds about the same as what we were using, we used a lot of harnesses, spoon harnesses, and scorpion spoons... I worked the four boards most of the time and a few things I had to get used to was 1. Getting enough slack between the two clips to make the tattle flag work properly 2. Making sure the boards were out and far enough away from each other. Multiple times when we first started a white bass or white perch would hit and swim the lure into the other line if they were not far enough apart, at one point i gave myself the nickname "the untangler". We did pull some reef runners behind our boards and we did not use inline with them because we were only targeting around 20 ft of water. Hope this helps a little