Thanks: 0
Likes: 0
Results 1 to 10 of 13
Thread: Rod holders?
Hybrid View
-
05-30-2017, 03:30 PM #1
Rod holders?
Are there any triple rod holder mounts that are able to come off each time. Our boat cover requires them to be taken off each time. Thanks for any help!
-
05-30-2017, 03:52 PM #2
Do a Google search for "Trident Rod Holder"
I see some are aluminum. Mine are Stainless.
There are double set of grooves in the pipe that slides into the gunnel rod holder on mine so they can be rotated every 90 degrees to run of the back or the side. They work great for me.
I built a Big John adjustable single holder to run off the rear gunnel with a Dipsey. So I can run 3 rods off each big board and a single rod on each side with a Dipsey keeping the spacing better than 4 rods off a big board on each side.
Hope this helps.
-
05-30-2017, 03:53 PM #3
Much cheeper than running a Big John Track systems all the way around.
-
06-05-2017, 06:14 AM #4
The tried rod holders slip into and "clock into" your gunnel rod holders built into the boat, if you have those.
-
05-30-2017, 06:25 PM #5
I use scottys rocket launchers. 476 with the 441 backing plate. Had less than 20 per holder with mounting g plate and everything. I run 3 a side. They pop on and off in seconds, have adjustable angle, and I run with the rods straight up across the water with no issues. 6 will be less than 120 bucks. Only fall back is the 4 holes per mount to drill.
-
05-30-2017, 10:49 PM #6
Are the trident rod holders removable? I will look into all options
-
05-31-2017, 05:20 AM #7
I have the titeloc ones with a base that slides into a 6 inch piece of track. I take them on and off. I added a set screw to make sure they didn't come out
-
05-31-2017, 05:52 AM #8
]
Cisco has rail and track quick release. My buddies use the double holders with quick release. They love them
-
05-31-2017, 06:03 AM #9
We have 60 " tracks and use the Scotty system. We leave the track adapter and rod holder base on all the time. Then we just remove the extension and rod holder to put our cover on. This is not as pricey as the Cisco. We love it been using it 3 years now.
-
05-31-2017, 09:54 AM #10
I used the Scotty's Triples. One base and 3 rod holders. One pop all three holders out for storage. I think the stock number was No. 256.
Gene
Similar Threads
-
rod holders
By rick3 in forum Western Lake Erie Fishing REPORTSReplies: 7Last Post: 03-28-2018, 09:02 AM -
Big Jon Rod Holders
By eyehammer'd in forum The Walleye MARKETPLACEReplies: 0Last Post: 02-02-2018, 01:09 PM -
rod holders
By wajski in forum The Walleye MARKETPLACEReplies: 1Last Post: 02-15-2017, 03:28 PM -
rod holders
By grantbrown in forum The Walleye MARKETPLACEReplies: 5Last Post: 03-17-2012, 07:35 AM -
rod holders
By Justin in forum The Walleye MARKETPLACEReplies: 4Last Post: 03-15-2012, 04:06 PM
Up for another weekend of fun on...
Anybody help a weekender?