Thanks: 0
Likes: 0
Results 1 to 5 of 5
Thread: Bottom buildup on boat
Hybrid View
-
01-15-2023, 11:00 AM #1
Re: Bottom buildup on boat
Dunn782...I leave my 16' Aluminum Starcraft in the water from April to November in West Harbor. I pull it around July 4th and wash and spray it off and then again at the final pullout in early Nov. Each time I use Muiratic acid found at Menards, Meijers, Lowes, Walmart, etc., which is about 30% hydrochloric acid in a 2 gallon garden sprayer to remove the marine growth. I spray the hull first with hi-pressure water then spray from the waterline down with the HCl soln., then follow up with another hi-pressure rinse. Do this outside preferably with a good breeze blowing as the fumes are quite nasty. My hull looks as good as ever when finished. The acid will discolor any unpainted parts of my trailer but it does not discolor painted areas. I would spray a test area first just to be sure. Good luck.
-
01-15-2023, 03:47 PM #2
Re: Bottom buildup on boat
Thanks for the feedback. Phatphil I would be too nervous to use HCl on an aluminum boat. I worked 30+ years for a company that makes HCl so know a lot about it. It's hard to make it stronger than about 38% and it will flat out dissolve aluminum. Drop a piece of aluminum it 30% HCl and it will fizz like Alka-Seltzer and gives off hydrogen gas. If you dilute it to 25% or less it won't fume but is still pretty potent. Any little imperfections in the paint may let the acid contact the bare aluminum and probably pit it so be careful.
I think if I go the dock route I'd probably have to pull it after a week and see what I got. I've had it in the water a week at a time but always cleaner water like the St. Clair river or a clear lake. Never had anything on the hull after that but Erie is a lot different. My old boat had a lot of white on it and in lakes with tannin stained water it would stain the white areas after a week but it would wash off after a while once I was in different water or washed it.
-
01-17-2023, 09:56 AM #3
Re: Bottom buildup on boat
Dunn...Coincidence, I too worked in a lab for BP. I was worried about the consequences of using HCL on my aluminum hull but after 5 years of spraying it twice a year I am noticing no pitting. One of the large marinas in our area uses muiratic acid on fiberglass hulls but they do dilute it to keep the fuming down. I may try that this year just to reduce the fumes, it does an amazing job and I don't know anything else that comes even remotely close to keeping my hull this clean. My buddy has barrier coated and antifouling paint on his aluminum hulled Crestliner and it has prevented buildup on his boat as another option.
Similar Threads
-
Plain Bottom Bouncers vs colored Bottom Bouncers
By Walleye Hunt'in in forum Western Lake Erie Fishing REPORTSReplies: 3Last Post: 08-08-2019, 04:53 PM -
Boat Bottom Paint
By PZeiler in forum Western Lake Erie Fishing REPORTSReplies: 2Last Post: 03-17-2016, 02:22 PM -
Bottom boat paint
By Jonny in forum Western Lake Erie Fishing REPORTSReplies: 9Last Post: 11-30-2015, 08:39 PM -
Bottom boat paint
By Jonny in forum Western Lake Erie Fishing REPORTSReplies: 0Last Post: 11-15-2015, 07:24 PM -
How far off the bottom?
By getpotts in forum Western Lake Erie Fishing REPORTSReplies: 12Last Post: 03-05-2014, 08:06 PM
Went out with another couple for a...
Saturday 5/18 evening casting