Thanks: 0
Likes: 0
Results 1 to 10 of 19
Thread: Kicker Rigging
-
03-09-2016, 02:10 PM #1
Kicker Rigging
Anyone have a recommendation where to take a boat to get a kicker setup? I just purchased 9.9 Pro Kicker, I'm looking to get it tied into my main fuel tank. Would also like to have it connected to the big outboard for steering from the helm. Its power trim/tilt so I will be looking for a fixed mount to be installed. I'm looking to have this professionally installed, mainly because I don't have the time to do it myself and I want to be fishing very soon.
Looking for somebody who does good work in the Toledo, Port Clinton, or Marblehead area.
Only one I have on my call list at the moment is Dubberts in PC. Anyone have any other recommendations?
Thanks,
Matt
-
03-09-2016, 04:47 PM #2
Check with mikes dockside. Right on 163 across from fort Firelands campgrounds
-
03-10-2016, 12:21 AM #3
buckeyebob check your pms
-
03-23-2016, 05:38 PM #4
Ok, I could use some more thoughts/opinions on this topic. I've taken my boat to a couple of different places to get the 9.9 rigged. Both places wanted to use a Panther Electro Steer T5 for steering. I would prefer to have a simple tie rod connecting my main to the kicker so that I can steer with the wheel. They both seem to think this wont work on my boat. The boat has twin outboard 2 strokes for main motors. They have a hydraulic cyclinder for steering. I'm not sure why I cant use a tie rod for this setup. Anyone have any expertise on this matter? Also would like opinions on the Panther T5 system. My fear is that it won't respond quick enough to adjust in less than ideal lake conditions, or heavy boat traffic. If anyone has this system, I would love to hear your opinion.
Thanks,
Matt
-
03-23-2016, 06:44 PM #5
I had a electro steer on my 9.9 Yahm and ended up sending it back I know they work but not for me. I tie my kicker to my main but I have a single 225 Yahm and Garmin a/p not really happy with it next move will be TR-1 on my kicker. Where is your kicker located?
-
03-23-2016, 06:46 PM #6
I use the T4 unit and like it very well. I have never had a situation that I have felt the least bit out of control. Now with that being said there is a slower reaction time involved when steering but nothing that I feel the need to improve on, just take the time to learn its oddities. Learning to avoid places and situations that puts more demand on your equipment than can be reasonably expected out of it is just good practice. So far my T4 has been bullet proof. The T5 is more compact in design and made to fit into a more confined spot where there is not enough room for the longer T4.
I would ask them why they feel the T5 is better suited for you instead of the tie rod. But from what you have stated so far I think maybe the distance from the main out board to the kicker might be to close for the tie rod to work properly, I base that on the fact you have twins and they are mounted off center on each side of the center line leaving a much shorter distance for the steering rod to function. But that is only my opinion based upon a semi-educated guess.Wakina
23 foot Pro Line
HDS 5X Sonar
HDS 5M GPS
Navonics chip, model #DMSD/649P+
Platinum Plus Lake Erie and Lake St Clair Marine.
Raymarine Dragonfly7 Sonar-Downvision-GPS combo with chirp technology.
Navonics Hotmaps Premium East chip
-
03-23-2016, 10:05 PM #7
Not an expect here, but do know a little. You mentioned you have hydraulic steering. My question is where does the hydraulic power come from, normally hydraulic power comes from the main motors, but could come from an electric pump as well. But if it comes from main motors, you won't have power steering unless they are running. Now manually steering a power system without the power assistance is possable but very tiring on the arms. I think we have all driving a car with ps that is not running and can be a work out.
I would think your hydraulic steering would be one of the main reason they are saying use an electric power unit instead of just a tie bar.
-
03-23-2016, 10:45 PM #8
I am not sure that he actually has hydraulic steering, I base that on most outboards with power assist have a cylinder attached that resembles a hydraulic cylinder but are actually a pneumatic cylinder you fill with air pressure and that acts as a damper from engine torque and assists in making turns. I am not questioning what he is saying about what he has but only relating what my experience has been. I had the pneumatic cylinder steering assist on my 30 ft T-Craft when I ran charters years ago. It had twin 2 cycle 225 HP Mercury outboards for power. If the pump for hydraulic steering would be independent of the motors then just turning the key to the on position should power the pump.
Last edited by wakina; 03-23-2016 at 10:49 PM.
Wakina
23 foot Pro Line
HDS 5X Sonar
HDS 5M GPS
Navonics chip, model #DMSD/649P+
Platinum Plus Lake Erie and Lake St Clair Marine.
Raymarine Dragonfly7 Sonar-Downvision-GPS combo with chirp technology.
Navonics Hotmaps Premium East chip
-
03-24-2016, 08:00 AM #9
The boat has a SeaStar hydraulic cyclinder. It does not have any type of electric pump, and the engines do not have to be running. The reason they don't think the connecting rod will work, is because of the offset of the kicker motor. The transom area of my boat is a little unique. It has two swim platforms on each side of the engines. The engines are kinda tucked up in the middle of the two swim platforms. So the kicker will be mounted on the starbird and offset quite a bit. I'm thinking of having someone custom bend me a stainless steel tie rod and have heim joints threaded on the ends for lateral movement to raise and lower the drive.
That is unless you guys convince me that the Panther Electro Steer is the way to go. I don't mind spending the extra money, as long as it is a good and effective system. I just don't want to end up with something that I don't like. I am attaching a couple of pictures of the back of my boat, so you can see what Im up against.
-
03-24-2016, 08:11 AM #10
That makes sense, I was just going by what he said he had. He said he had hydraulics. Though I have not ever seen a outboard have a power steering pump I am sure there is some out there.
-
Similar Threads
-
Perch rigging
By Midnightrider1818 in forum Western Lake Erie Fishing REPORTSReplies: 11Last Post: 07-17-2017, 11:23 AM -
Planer Mast Rigging Help
By jimbob in forum Fishing Techniques Discussion (jigging, drifting, trolling)Replies: 3Last Post: 05-04-2014, 03:39 PM -
trolling bag rigging question
By bowguy84 in forum Western Lake Erie Fishing REPORTSReplies: 12Last Post: 05-13-2012, 07:14 PM -
Need advice rigging boards
By ReelTime in forum Fishing Techniques Discussion (jigging, drifting, trolling)Replies: 1Last Post: 07-17-2009, 10:49 AM -
First post / Advice rigging my boat
By ReelTime in forum Western Lake Erie Fishing REPORTSReplies: 9Last Post: 07-18-2008, 12:01 AM
Price reduced to $26,000
1995 Proline 2950 30 ft