Bert's Custom Tackle

[wakina]

You need to STFU Son, as you have proven beyond a reasonable doubt to the fine folks riding the "short bus" you are an IGNORANT LOSER! See my other posts for a more detailed description and quit hitting on the toothless stinky truck stop waitress. You bore me.

If I bore you why keep answering back?

Not a chance that I would be hitting on the toothless stinky truck stop waitresses .

How do you know those waitresses are toothless and stinky? Oh I get it, You already hit on them and they turned you down must have gotten an earful of your BS and turn them off, they said adios Professor fishreed didn't they. No wonder you are on this site seeking attention favorable or not!

You told me that I need to STFU! That is never going to happen. I have been retired for over 10 years(10 years is a decade so you know). I have a lot of idle time on my hands and now that you have came to this site raising hell about something you know nothing about I am going to make it my business to make your life miserable on Walleye dot com. .
You want us to believe that you are smart but you have failed to grasp the problem the original post brought up.

The holder in question was mounted on a Berts Custom Tackle track System. When the riser was removed from the track it was apparent the 2 of the 3 screws that hold the riser(hollow aluminum tube) to the base plate that would go into the track had fractured. I simply replaced all 3, 10-24 machine screws that were used to mate the holder base plate to the riser tube. I added a drop of thread locker to each screw to eliminate the screw from working loose again. The riser tube is drilled and tapped on the bottom for 10-24 screws and the three screws fasten the riser tube to the base plate from the bottom of the base plate into the riser. that assembly is then mounted back into the track system on the gunwale. If that eludes you then you should go back to the school that you earned(?) your degree from and request a refund!