questions on worm harnesses

[OffShore24]

Everyone has there own method, but this is how I do it. I always start out around 1.0- 1.3 when I first start out pulling harnesses. I usually just use inline weights. I run all them all out different depths and Ill start running a straight line and if nothing fires ill make some s turns, and depending on what boards fire, I will adjust my speed, outside on turn fires, ill speed up my program, inside fires, ill decrease my speed. I prefer the #6 hatches, and 5/6 deep cup colorados. When the mayfly hatch is on, I will run smaller gold blades. If I want to troll less than 1mph ill switch to Ghost blades. But if I only had to choose one blade it would be Tommy Harris #6 hatchet......... Good luck

This is a good method...

Also keep in mind when you make a turn w/ lead weights the outside speeds up and rises the inside slows down and sinks. W/ jets the the outside speeds and can actually drop a bit and the inside slows and rises.

So not only is the speed changing so is the depth.

Dont be afraid to put on spoons and go fast