Thanks: 0
Likes: 0
Results 1 to 10 of 18
Thread: String Braid or mono
-
08-06-2017, 12:31 PM #1
String Braid or mono
Looking for recommendations for size and type of line to re-string my trolling line counters. Mainly troll meat on harnesses, some reef runners, bandits, cranks in general. We mostly run worm harnesses.
-
08-06-2017, 02:01 PM #2
30lb power pro
-
08-06-2017, 02:06 PM #3
-
08-06-2017, 02:17 PM #4
I use braided on dipseys. Mono leader then no snubbers. Mono on others with church boards. Braided seems to cut/pull out of clamps on boards. I'm sure their is 100's of different answers. I like 17# test mono. I think what ever you use, things happen. Your going lose some.
-
08-06-2017, 03:27 PM #5
12 lb big game mono, I like it as good as XT and it costs a lot less. I use this with inline boards with harnesses and cranks. .014" diameter so all the dive curves are accurate.
-
08-06-2017, 08:55 PM #6
X2 on the 30lbs braid. We put 1000ft of big game 25lb then 500ft of power pro. We double check all the final out to 100. 400 actually buts me square on but with 500 i read about 2 to 3 ft long at 100 which noreally only makes a few inches in depth being that far out. Plus it gets me extra line on the reel for a few tangles or brakes without having to strip all the braid off. I want to note all my distances were using the reel counter not actual lengths.
All diameters of reels will take different lengths to make them filled correctly. Thanks Jim from eye hunters for the trip on getting my okumas filled fast and correctlyLast edited by branhamautomotive; 08-06-2017 at 08:57 PM.
-
08-07-2017, 09:11 AM #7
30 lb PowerPro backed with mono. Since I switched to this years ago I haven't looked back!
-
08-07-2017, 02:28 PM #8
30 lb pwoerpro with 20lb berkely xt backing 450 foot of braid and 300 ft of backing
-
08-08-2017, 09:45 AM #9
I use mono on my planer board rods and braid for dipseys 20 pound maximum mono
-
08-08-2017, 10:57 AM #10
we use 15lb Maxima mono on rods that we use the inline boards on and 30lb power pro braid on rods for the dipseys.All reels are calibrated,which I finally figured out how to do 2yrs ago.Recommend mono for releases since had problems with braid not holding in the releases for boards.If get a tangle with mono,at least you got a good chance of untangling.With braid,you get a tangle, most likely cutting.
-
Similar Threads
-
Mono vs. Flouro ???
By Capt Eric in forum Western Lake Erie Fishing REPORTSReplies: 19Last Post: 02-16-2018, 10:25 AM -
Braid vs mono what works best for you
By Reel_Deal in forum Western Lake Erie Fishing REPORTSReplies: 15Last Post: 05-21-2017, 09:03 PM -
Mono or Braid
By Greatwhitehunter in forum Western Lake Erie Fishing REPORTSReplies: 13Last Post: 07-14-2016, 06:32 AM -
Braid to fluoro or mono leader
By wakina in forum Western Lake Erie Fishing REPORTSReplies: 6Last Post: 01-30-2014, 11:12 PM -
mono coler
By LmitingOut in forum The Walleye MARKETPLACEReplies: 3Last Post: 03-10-2011, 10:00 AM
Price reduced to $26,000
1995 Proline 2950 30 ft