Motor overheating when trolling

[stubby]

No, did not replace the housing, might not be sealing well, might just go with a total rebuild kit for the impellar. really don't want to resort to an outboard on the rear of the boat. Motor is a Mercruiser, I/O. Thanks all, mike

you must check the housing and especially the cover with a straight edge. usually the covers wear concave and at times can be sanded with a glass plate and some compound if the plate is thick enough.....fwiw.....good luck

[skipper9]

Was the old impeller missing any arms.. I have had some of the rubber arms blocking some passage ways I. The past.

[fishin2]

No,nothing missing. Was just a little dry and I replace it every other year, needed or not. Only had the boat 2yrs and this is the first time pullin boards with it and she got a hot at an idle. Gonna check into an impeller housing today, just might be the way to go, replace everything and eliminate that possibility. Thanks fellas, your always a great help, Mike

[BILLY JOE]

could be the water jackets in your exaust manifold are starting to corrode shut creating a water flow problem this happens alot to salt water engines. just a thought