Thanks: 0
Likes: 0
Results 1 to 10 of 22
Thread: walleye at the nut
Hybrid View
-
09-02-2013, 12:34 PM #1
walleye at the nut
Are the walleye still hitting out of walnut gonna try to get up Saturday hope it works let
-
09-02-2013, 02:22 PM #2
-
09-02-2013, 05:13 PM #3
Didn't make it out this weekend, Boat developed a leak and discovered it was the ujoint bellow. Took 2 days to fix.
I was in the Walnut marina today only to make sure everything worked. Couple boats coming off the lake said 5 footers out there. Didn't hear any fish reports.Last edited by skinny5382; 09-02-2013 at 05:13 PM. Reason: spelling
24' Caravelle
-
09-02-2013, 06:55 PM #4
Hey skinny, it's always something with a boat at least its fixed.the weather isn't cooperating much this year either
-
09-02-2013, 09:31 PM #5
Must have been the weekend for issues. I had to replace the cable from my sonar to dsm, my trailer winch broke too. However, it could have been worse- I towed a trophy pro back into walnut after his steering broke right outside the channel.
-
09-03-2013, 04:37 AM #6
Good job Shedidntno, no better feeling then fellow fisherman helping each other out. I was broke down over by the Ohio line for 10 hours in June with no other boats around.
At the rate I'm going this year I will have a 40 year old (brand new boat). June we needed batteries, starter, alternator, radio, antenna, September needed bellows, gimbal bearing, shifter cable. Almost brand new boat lol24' Caravelle
-
09-03-2013, 08:16 PM #7
Saturday and Sunday at Walnut
We fished sat and went nw to 65', fished from 8:00 to 2:00 and landed 17 eyes and two steel, lost alot at the boat, on sun we went a little more west but still hung in the 65-70' range, landed 19 eyes and one steel. lots of boats, lots of fish and some idiot also, I had to hand line my board line to keep from being run over as a guy cut between me and another boat. others I had talked to cought limits, We just had a great time on the boat. Good luck if you go
-
09-05-2013, 08:13 AM #8
leadcore
prime time were you using planer board releases with lead core
-
09-05-2013, 08:16 AM #9
do you put different amount of lead on each pole or all the same
-
09-05-2013, 11:18 AM #10
Hey jig are u heading up this weekend
We did well yesterday a couple...
Kelley's