Printable View
There has to be a good way to store those 6 ft leaders we use for our divers. Can some of you tell your method because I'm sure it beats my constant tangled mess. I've thought about taking an old line keeper and just wrap one on and hook the next snap hook, roll and repeat until they're all on the roll. Ideas?
Foam Lindy rigger snell holder might work for you
I go to the dollar store or Walmart and buy pool noodles cut them about 1 ft long and use aluminum nails to hold them after wrapping them around the pool noodle.Quote:
Originally Posted by Eyezcrazy
Pool noodle's you can store the blade on or in a seperate box. push the treble hook and octopus hook and wrap around and use a pin to secure the swivel.
[IMG]http://i215.photobucket.com/albums/c...07/012-1-1.jpg[/IMG]
:I've been frustrated with this also so I decided to go simple. I did use the round noodle type but often found my leader line would take the shape of the cylinder. This weekend I used a rectangular piece of cardboard and cut slits into the top and bottom of the cardboard and wraped the lines across the cardboard. Since I use both long and short leaders, I folded the cardboard in half and labeled one side short (leaders) and one side long (leaders). I find the leader line stays more straight and I can quickly idnetify which are short and long leaders.
I knew there would be some good ideas from you guys. And Wallydog1 those are some fine looking harnesses!
I've been keeping mine in the 2x2 seal top plastic bags and with my eyes and the waves, well, lets just say it takes away from the relaxation I am out for.
Thanks for the replies.
There is also a product called tackle tamer that uses velcro to secure ends. simple wrap around and velcro to secure
we have used the noodles for a few years now and never have had a problem on the line memory. But if it does take shape of the noodle or even if it starts twisting from to much use - rub the line across the bottom of your rubber sole shoe or tennis shoe and it will take the memory out!
Hope to be in this weekend, usually in by April 1 but had engine problems! LETS GO FISHIN'
if you use the noodles, slit one end ( if they have a hole use that) and stuff a 1oz jig in the opening, hook the hook into the foam. this will keep your noodles from blowing around/away in the wind.
http://i58.photobucket.com/albums/g2...t/100_1893.jpg
we use an empty line spool....doesnt take up much room and holds a ton of leaders
Gloomis, you're right! I tried the old line roll and it holds the 6 ft leaders like a dream, no tangles and I can just roll em right off. I bought a noodle for my harnesses though and things are getting much easier to rig.
Thanks everyone for the replies!
slit one end of the noodle and hook a 1oz jig into the end. keeps your noodles from blowing out of the boat. also learned from a friend that if you run really long leaders, use threaded rod thru the center of the noodle leaving one end of the threaded rod sticking out ( nuts/washers at both ends). use a cordless drill on that long end and you can wind up 25 to 100 ft REAL quick. works great!
of course i only run tru trips and spoons so all my leaders have on them is a snap on one end and a snap swivel on the other...i can see how the noodle works best for those of you pulling harnesses...lots of good ideas out there just like hearing everyones suggestions. Happy fishing to all
I agree, the noodle is a cheap/easy fix to your problem. Works like a dream for harnesses!
My favorite for snells is the Tackle Buddy. I've been using them for 10 or so years. I tried to post a pic but apparently I'm not computer savy enough to figure it out.