What size line should I use with my offshore boards? I'm new to this and need some advise.
Printable View
What size line should I use with my offshore boards? I'm new to this and need some advise.
I have been using Sunline Supernatural monofilament 16# in green. This is a line suggested by Capt Juls and so far it has worked great with my boards. IMO refrain from spider wire and power pro lines. They can slip in the snaps and tighten down on tattle tails cutting into the pads. Good Luck!
Maybe should've started a different thread, but I'm "looking" at some Offshore In-Line boards. What size would I need to pull dipseys ? (Sorry for the highjack. )
Don't think you can run dipseys on boards, they run themselves.
Thanks for the info.
Church Tackle makes a large inline board, the TX-44, that can pull a dipsy diver. Since a dipsy diver can be set to plane out away from the boat on its own, most people do not use them behind planer boards. These TX-44 boards are used by the salmon guys to pull 300+ ft copper lines to get their presentation very deep.
Gotcha. What would I run if I am targeting 50'. ? Usually can only hit PA waters a couple times a year. Boards and jets ? Usually run harness, but would like to try some spoons. I'm clueless !!
To get down that deep, I'd use dipsy divers. They have a weight that rotates to make it plane out to the side of the boat and is adjustable to make it go out left or right. You can easily run two divers per side without boards. Attach a leader the length of your rod to the rear of the dipsy diver with your spoon or worm harness. Attach the other end to your line. On the right side of the boat, set the first dipsy to the #3 right position. Let that out about 140 feet to reach a 50 foot depth. Let it out slowly. Place it in the front rod holder. Take your next rod and set the diver to the #1 right position. The number 1 position will plane out to the side a little less than the one with the three setting. Let this one out about 105 feet to reach a 50 foot depth. Place this one in a rod holder behind the first one. Repeat on the other side of the boat. You can put a third line per side if you have three anglers. For those, use the zero setting and let those out about 90 feet. When you buy the dipsy divers, they come with instructions on dialing in the settings and they come with a chart that tells you how much line to let out to achieve a variety of depths on the various settings. In my opinion, dipsy divers are easier to manage than planer boards. If you get a fish on the outside dipsy, clear the inside one before landing the fish to avoid tangles. Also, instead of placing all the lines down 50, you can run your spoons or worm harnesses at a variety of depths and the fish can tell you what depth they're feeding at. This lets you cover a wider vertical area and increases your chances of hooking up.
Thanks for the response. Now do I have to go is get up there. Members here name this a great site. Can't wait to get out !
Some use #10 mono, some prefer braid in #30 test/10 dia.Quote:
Originally Posted by TabBiser
I use #17 test mono, works best for me.
Thanks! I put on 14 last night. I got some of the Sunline Supernatural online from Amazon at a 60% savings from other retailers. I went to Cabelas last night to pick up a few things and saw the price there vs Amazon. Wow, Amazon blew them out of the water plus I got 300 yd reels vs 200 at Cabelas.
Check these prices out.
http://www.amazon.com/gp/product//B0...?ie=UTF8&psc=1
Ebijack, you suggested 17 lb mono to me a few years back and I don't think I ever did thank you for that. Thank you!Quote:
Originally Posted by ebijack
OP, consider this a vote for 17 lb mono for your inline boards.