Perch rigging Perch rigging Perch rigging Perch rigging
Thanks Thanks:  0
Likes Likes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Perch rigging

  1. #1
    Join Date
    Jul 2017
    Location
    Toledo
    Posts
    38
    Post Thanks / Like

    Default Perch rigging

    Hey guys. New to all this. I bought some perch harnesses on eBay. Wondering how you guys rig. Do I need to put a slip weight or a sinker on my line also or what. Also anybody perch fishing around metzger marsh and where is a good place to go in this area. Any help is very much appreciated

  2. #2
    Join Date
    Dec 2014
    Location
    N W Ohio
    Posts
    292
    Post Thanks / Like

    Default

    I use a spreader with a 3/4 oz built in, (see my photo's in the album.)

    Quote Originally Posted by Midnightrider1818 View Post
    Hey guys. New to all this. I bought some perch harnesses on eBay. Wondering how you guys rig. Do I need to put a slip weight or a sinker on my line also or what. Also anybody perch fishing around metzger marsh and where is a good place to go in this area. Any help is very much appreciated

  3. #3
    Join Date
    Nov 2009
    Posts
    54
    Post Thanks / Like

    Default

    There are several bait shops near to where you will be fishing. If you bought (SOME) gear from them they could recomend how to rig your line. They work hard, get up very early and know what works, not trying to bash you for shopping online BUT the few pennys you save is not worth it to me plus you have to get your minnows from them anyway. just sayin. Hope I didnt offend you but gave you somthing to think about.

  4. #4
    Join Date
    Feb 2009
    Posts
    697
    Post Thanks / Like

    Default perch

    Quote Originally Posted by Midnightrider1818 View Post
    Hey guys. New to all this. I bought some perch harnesses on eBay. Wondering how you guys rig. Do I need to put a slip weight or a sinker on my line also or what. Also anybody perch fishing around metzger marsh and where is a good place to go in this area. Any help is very much appreciated
    we went out yesterday me wife 3 grandkids bought 4 dozen goldies ran out of minnows and ended with 53 perch weighed 17 pounds then ran up towards intake to cast for some eyes made 1 drift caught 11 walleye kept 3 straight out from pier 20 ft of water maybe a little north had buddy trolling same spot took 35 eyes kept 11 there is a lot of fish right at your home port sad thing i got gas so my fish cost me a hundred bucks but i have fresh fish for dinner and some for freezer. butch and Dennys loaded down with buckets of fish both walleye and perch we use spreaders on bottom minnows are getting expensive not very many for 18 bucks for 4 dozen looked like 1 dozen

  5. #5
    Join Date
    Jul 2017
    Location
    Toledo
    Posts
    38
    Post Thanks / Like

    Default

    What were you using that you caught the walleye on

  6. #6
    Join Date
    Feb 2009
    Posts
    697
    Post Thanks / Like

    Default walleye

    Quote Originally Posted by Midnightrider1818 View Post
    What were you using that you caught the walleye on
    my homemade harnesses i do sell them along with perch spreaders and perch rigs really busy right now we ran out of supplies thats why i was able to go fishing now rain and back to making spreaders

  7. #7
    Join Date
    Feb 2009
    Posts
    697
    Post Thanks / Like

    Default

    you might of bought a walleye harness which uses a egg sinker got a pick does it have a blade or what sent you a pm

  8. #8
    Join Date
    Jun 2012
    Posts
    62
    Post Thanks / Like

    Default

    If the perch are biting hard, i use a spreader. Otherwise, and sometimes anyhow, what I do is this:

    Put a swivel on the line. Put a sinker on the swivel. Get some of those plastic in-line slip fit thingies that you thread a loop into on one side, your hook on a leader on the other. If you don't know what I mean, I can post pics. Anyhow, put one about 8" above the sinker, so the minnow will be right near the bottom. Put a second so it's about a foot off the bottom, give or take.

    This provides a more sensitive feel than a spreader, lets you keep the sinker right on the bottom, and lets you figure out where the fish are biting- tight to the bottom or a tad off.

    Another good approach is to put the sinker on about a 1 foot leader, on the swivel, and put the perch hook about on a similar length leader, but with a small in-line Styrofoam float near the hook, so it stays off the bottom. These are available in a variety of colors and if the water is murkey, sometimes helps.

  9. #9
    Join Date
    Apr 2011
    Posts
    97
    Post Thanks / Like

    Default

    Best perch rig.Tie 2 hooks directly to your line.The top hook should be about 20 inches and the bottom hook should be 8 inches .Then tie a one ounce barrel sinker to the end of the line.This setup will out fish spreaders or any other kind of perch rig.I use spyder wire and a graphite rod .

  10. #10
    Join Date
    Mar 2013
    Posts
    80
    Post Thanks / Like

    Default

    try using crappie rigs for the same effect


Similar Threads

  1. Kicker Rigging
    By Jiga-Byte in forum Western Lake Erie Fishing REPORTS
    Replies: 18
    Last Post: 03-24-2016, 04:18 PM
  2. Planer Mast Rigging Help
    By jimbob in forum Fishing Techniques Discussion (jigging, drifting, trolling)
    Replies: 3
    Last Post: 05-04-2014, 03:39 PM
  3. trolling bag rigging question
    By bowguy84 in forum Western Lake Erie Fishing REPORTS
    Replies: 12
    Last Post: 05-13-2012, 07:14 PM
  4. Need advice rigging boards
    By ReelTime in forum Fishing Techniques Discussion (jigging, drifting, trolling)
    Replies: 1
    Last Post: 07-17-2009, 10:49 AM
  5. First post / Advice rigging my boat
    By ReelTime in forum Western Lake Erie Fishing REPORTS
    Replies: 9
    Last Post: 07-18-2008, 12:01 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •