Fish Finder Fish Finder Fish Finder Fish Finder
Thanks Thanks:  0
Likes Likes:  0
Results 1 to 8 of 8

Thread: Fish Finder

  1. #1
    Join Date
    Sep 2014
    Posts
    122
    Post Thanks / Like

    Default Fish Finder

    I bought a new Lowrance Elite 7 Chirp combo it works great when I'm trolling but as soon as I speed up I get a lot of clutter. Does anyone have an idea what to try?

  2. #2
    Join Date
    Jun 2016
    Location
    Marion, Ohio
    Posts
    14
    Post Thanks / Like

    Default

    Usually clutter at speed is caused by air bubbles under the boat hull interfering with the transducer. One way to help eliminate it is to use a thru hull transducer

  3. #3
    Join Date
    Jun 2016
    Location
    Columbus Grove, OH
    Posts
    2
    Post Thanks / Like

    Default

    I have the exact same unit and have the same problem. I went to Bass Pro where I bought it and they said to try lowering the transducer a quarter inch below the bottom of the boat. I've lowered it but haven't had a chance to try it. My unit wouldn't even show depth when running over 15 mph. I am really disappointed in the unit.

  4. #4
    Join Date
    Jun 2016
    Location
    Marion, Ohio
    Posts
    14
    Post Thanks / Like

    Default

    If you are losing bottom at 15mph try going to manual sensitivity and turning it up. Might have clutter but will pick up the bottom a lot better also

  5. #5
    Join Date
    Jul 2009
    Posts
    188
    Post Thanks / Like

    Default

    First make sure your transducer is not inline with anything protruding from the bottom of your boat, such as being inline with a row of rivets etc. Use a straight edge coming out from the bottom of your hull and make sure transducer is approx. a 1/4-3/8" below and tilted slightly forward, in other words so the water coming off your bottom can smack the transducer on its face. Having the transducer tilted even slightly toward the rear will cause air bubbles. You might need to play with the depth and angle of the transducer a bit, it won't take much change to make a real difference in your reading. I have a riveted aluminum hull and it took a bit of adjusting to get it right but it now reads well at 35mph. Good luck.

  6. #6
    Join Date
    Sep 2014
    Posts
    122
    Post Thanks / Like

    Default

    I never loose a bottom reading just get a lot of clutter but I'll try to lower it some. Thanks

  7. #7
    Join Date
    Sep 2010
    Location
    Mansfield Ohio
    Posts
    675
    Post Thanks / Like

    Default

    I have a garmin on my 19ft renken, would not read anything when on plane, had the transducer level but below the bottom a touch, tipped down slightly in the rear, reads all the time now.

  8. #8
    Join Date
    Mar 2015
    Location
    Fort Wayne,IN
    Posts
    19
    Post Thanks / Like

    Default

    I have a Lund Tyee and put the elite 7 on it. It took several trips and adjustments to get to read. I still get some clutter but you can tell the fish spikes from it. get it as far away from the prop wash as possible and use a straight edge off the bottom of boat so the transducer sits halfway down on inside edge. Run it and have someone watch to make sure it is skimming the water and it is in the cleanest water coming off the boat. (make sure it does not line up with rows of rivets). Then mark some walleye at trolling speed and check the tail marks this will tell you up or down. I can see the bottom and fish running 35mph (I still get some clutter at this speed). Glass haul is alot better image due to is smooth haul design. This unit has been good to me,I like it better than the hds unit I have for sonar and I even put the airmar p66 transducer on the hds to try for a better image. Almost forgot, put a tranducer board on the boat. You can get them at Cabelas or if you have a 3/4 piece of umhw will work.(saves holes in the transom)


Similar Threads

  1. GPS/Fish finder
    By secosman in forum Western Lake Erie Fishing REPORTS
    Replies: 3
    Last Post: 06-09-2017, 08:34 PM
  2. New fish finder?
    By A to Z Fishing in forum Western Lake Erie Fishing REPORTS
    Replies: 8
    Last Post: 01-14-2017, 06:51 AM
  3. Fish finder
    By Whopper in forum Western Lake Erie Fishing REPORTS
    Replies: 2
    Last Post: 04-01-2016, 02:10 PM
  4. Fish finder??
    By Buckeyebob in forum Western Lake Erie Fishing REPORTS
    Replies: 18
    Last Post: 12-03-2014, 09:03 AM
  5. fish finder help
    By penalty box in forum Western Lake Erie Fishing REPORTS
    Replies: 4
    Last Post: 06-04-2009, 10:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •